How to use trap bird with lidi
Speaking of birds will not be endless, especially for the bird hobbyist, bird hobbyist willing to spend a lot of money for the sake of buying a favorite bird. most hobbyists chirping birds prefer to buy birds or birds just caught from the forest because the birds of the forest and still wild mostly have stamina and loud chirp. as well as for hobbyists taming wild birds have its own special features.
birds of birds are very much sold in the market with varying prices, birds bird is the catch by the sellers in the forest area. this time there is one way from me how to catch wild birds using stick.
How to catch bird with stick
1. Provide good bird food in the form of caterpillar hongkong. earthworms. cricket or fruit, this time I will use kates or papaya fruit because my target is a finches bird.
2. Provide a thinly shaped stick with a length of 10cm as much as possible according to the area used, a good stick used is a stick derived from the outer bamboo skin, in addition to easy in merautnya bamboo stick is also very strong when used.
3. lidi that has been cut into pieces in rubbing LEM mice (brand FOX) why I use glue fox, this glue in addition to the clear color of this glue also has a very strong keeratan to trim the feathers of birds. the glue is smeared on the tip of the stick to the base of the stick but try to be held
4. put kates earlier on the ground, then circle kates with glue that has been covered with glue earlier. keep the distance of the stick should be an inch with the other let the area become wide.
5. Monitor the traps that you install from a distance, if there is a bird that landed and came and then flashed can not fly should be taken. then pull the stick very slowly by rubbing the first stick stick to the bird with cooking oil to easily peel off, after all the wash off bird feathers with clean water and then drying the bird to dry.
so many ways tips from me may be useful for you
WASSALAM
0 Response to "How to use trap bird with lidi"
Post a Comment